Table of Contents
Advertisement
Figure 25. Removing the system cover
Next steps
1.
Replace the system
cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Ensure that all internal cables are connected and placed out of the way, and no tools or extra parts are left inside the
system.
Steps
1. Align the tabs on the system cover with the guide slots on the chassis.
2. Close the system cover release latch.
3. Using a 1/4 inch flat head or Phillips #2 screwdriver, turn the lock clockwise to the lock position.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
69
Advertisement
Table of Contents
