Installing The Vga Port - Dell PowerEdge R7615 Installation And Service Manual

Figure 174. Removing the VGA port
5. Install the filler bracket if not replacing the VGA port.
Next steps
1. Replace the VGA port.

Installing the VGA port

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the air shroud
4. Remove expansion card
NOTE: VGA port is supported only in slot 4 of the expansion card riser.
Steps
1. Open the latch on the expansion card riser and remove the filler bracket from the expansion card riser.
2. Slide the VGA port into the expansion card riser.
224 Installing and removing system components
Safety instructions.
Before working inside your
or remove the GPU air shroud.
riser.
system.