Table of Contents
Advertisement
Figure 72. 12 x 3.5 SAS/SATA with APERC 11 in Riser 2
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 67. 12 x 3.5 SAS/SATA with APERC 11 in Riser 2
Order
1
2
3
110
Installing and removing system components
From
CTRL_SRC_SB1 (fPERC controller
connector)
SIG_PWR_1 (system board power
connector)
CTRL_SRC_SA1 (fPERC controller
connector)
To
BP_DST_SB1 (backplane signal
connector)
BP_PWR_1 (backplane power
connector)
BP_DST_SA1 (backplane signal
connector)
Advertisement
Table of Contents
