Rear View Of The System - Dell PowerEdge R7615 Installation And Service Manual

Table of Contents

Advertisement

Table 5. Features available on the front of 12 x 3.5-inch drive system
Item
Ports, panels, and
slots
1
Left control panel
2
Drive
3
Right control panel
4
Information tag
NOTE:
For more information about ports, panels, and slots, see the Technical specifications section.

Rear view of the system

Figure 6. Rear view of system Direct Liquid Cooling (DLC) configuration
Table 6. Rear view of the system with Direct Liquid Cooling (DLC) configuration
Item
Ports, panels, or slots
1
PCIe expansion card riser 1
(slot 1 and slot 2)
2
BOSS module
3
PCIe expansion card riser 3
(slot 4 and slot 5)
4
Coolant tubes
5
PCIe expansion card riser 4
(slot 7 and slot 8)
6
Power supply unit (PSU2)
7
USB 2.0 port
8
USB 3.0 port
12
System overview
Icon
Description
N/A
Contains the system health, system ID, and the status LED indicator.
N/A
Enables you to install drives that are supported on your system.
N/A
Contains the power button with integrated power LED, 1 x VGA port,
1 x 2.0 USB port, iDRAC Direct (Micro-AB USB) port, and the iDRAC
Direct status LED.
N/A
The Express Service Tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address, and so
on. If you have opted for the secure default access to iDRAC, the
Information tag will also contain the iDRAC secure default password.
Icon
Description
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the
installation guidelines
N/A
BOSS-N1 module.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the
installation guidelines
N/A
Cold coolant flows into the system from one tube and hot coolant
leaves the system from another tube.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the
installation guidelines
PSU2 is the secondary PSU of the system.
The USB port is 4-pin, 2.0-compliant. This port enables you to
connect USB devices to the system.
The USB port is 9-pin and 3.0-compliant. This port enables you to
connect USB devices to the system.
section.
section.
section.
Expansion card
Expansion card
Expansion card

Advertisement

Table of Contents
loading

This manual is also suitable for:

E96s

Table of Contents