Table of Contents
Advertisement
4.
Remove the GPU air shroud top
5. If installed,
remove the GPU air shroud
6. If removed,
install the GPU into the expansion card
NOTE:
Full length risers are supported only in Riser 1 and Riser 4 slot and first install Riser4 and then Riser1.
Steps
1. If installed, remove the riser blanks by loosening the captive screws.
NOTE:
Store the Riser blanks for future use. Filler brackets must be installed in empty expansion card slots to maintain
Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the
system and aid in proper cooling and airflow inside the system.
Figure 159. Removing the Riser 1 blank
Figure 160. Removing the Riser 4 blank
cover.
filler.
risers.
Installing and removing system components
213
Advertisement
Table of Contents
