Installing A 2 X 2.5-Inch Rear Drive Module Cooling Fan - Dell PowerEdge R7625 Installation And Service Manual

Table of Contents

Advertisement

Figure 47. Removing a 2 x 2.5-inch rear drive module cooling fan
Next steps
1.
Replace 2 x 2.5-inch rear drive module cooling

Installing a 2 x 2.5-inch rear drive module cooling fan

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the 2 x 2.5-inch rear drive module air
Steps
Align and lower the rear drive module cooling fan into the rear drive module until the fan clicks into place.
Figure 48. Installing a 2 x 2.5-inch rear drive module cooling fan
88
Installing and removing system components
fan.
Safety
instructions.
Before working inside your
shroud.
system.

Advertisement

Table of Contents
loading

This manual is also suitable for:

E94sE94s001

Table of Contents