Dell PowerEdge R7615 Installation And Service Manual page 56

Table 55. System Profile Settings details (continued)
Option
Power Profile Select
PCIE Speed PMM Control
EQ Bypass To Highest Rate
DF PState Frequency
Optimizer
DF PState Latency
Optimizer
DF CState
Host System Management
Port(HSMP)Support
Boost FMax
Algorithm Performance
Boost Disable (ApbDis)
System Security
To view the System Security screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >
System Security.
Table 56. System Security details
Option
CPU AES-NI
System Password
Setup Password
Password Status
Table 57. System Security details (continued)
Option
TPM Security
TPM Information
TPM Firmware
TPM Heirachy
56 Pre-operating system management applications
Description
High performance Mode(default): Favors core performance. All DF P-States are available
in this mode and the default DF P-State and DLWM algorithms are active. Efficiency Mode:
Configures the system for power efficiency. Limits boost frequency available to cores and
restricts DF P-States available in the system. Maximum IO Performance Mode: Sets up
Date Fabric to maximize IO sub-system performance.
Reduce link speed when devices are idle. This option is set to Auto by default.
Controls the ability to advertise Equalization Bypass to Highest Rate Support in TSxs sent
prior to LinkUp=1r. This option is set to Disabled by default.
Disabled: Disabled the DP P-state CCLK effective frequency optimizer. Enabled: Enables
the DP P-state CCLK effective frequency optimizer. This option is set to Enabled by default.
Disabled: Disables the DP P-state latency optimizer. Enabled: Enables the DF P-state
latency optimizer. This option is set to Enabled by default.
This field enables(0xF)/disables(0x0) DF Cstate. This option is set to Enabled by default.
This value controls Host System Management Port(HSMP) interface to provide OS-level
software with access to system management functions via a set of mail box registers. This
option is set to Enabled by default.
Boost Fmax. This option is set to 0 - Auto by default.
Enables or disables the Algorithm Performance Boost Disable (ApbDis). This option is set to
Disabled by default.
Description
Improves the speed of applications by performing encryption and decryption by using
the Advanced Encryption Standard Instruction Set (AES-NI). This option is set to
Enabled by default.
Sets the system password. This option is set to Enabled by default and is read-only if
the password jumper is not installed in the system.
Sets the setup password. This option is read-only if the password jumper is not installed
in the system.
Locks the system password. This option is set to Unlocked by default.
Description
This field controls the reporting of the Trusted Platform Module(TPM) in the system.
When set to Off, the presence of the TPM is not reported to the OS.
When set to Off, the presence of the TPM is not reported to the OS.
When set to On, the presence of the TPM is reported to the OS.
Indicates the type of Trusted Platform Module, if present.
Indicates the firmware version of a Trusted Platform Module(TPM).
Allows enabling, disabling or clearing the storage and endorsement hierarchies.