Dell PowerEdge R7615 Installation And Service Manual page 46

Table 39. System Information details (continued)
Option
System CPLD Version
UEFI Compliance Version
AGESA Version
SMU Version
MPIO Version
Memory Settings
To view the Memory Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Memory Settings.
Table 40. Memory Settings details
Option
System Memory Size
System Memory Type
System Memory Speed
Video Memory
System Memory Testing
DRAM Refresh Delay
DIMM Self Healing(Post Package Repair) on
Uncorrectable Memory Error
Correctable Error Logging
Processor Settings
To view the Processor Settings screen, power on the system, press F2, and click System Setup Main Menu > System
BIOS > Processor Settings.
Table 41. Processor Settings details
Option
Logical Processor
Virtualization Technology
46 Pre-operating system management applications
Description
Specifies the current version of the system complex programmable
logic device (CPLD) firmware.
Specifies the UEFI compliance level of the system firmware.
Specifies the AGESA reference code version.
Specifies the SMU firmware version.
Specifies the MPIO firmware version.
Description
Specifies the memory size in the system.
Specifies the type of memory installed in the system.
Specifies the system memory speed.
Specifies the amount of video memory.
Specifies whether the system memory tests are run during system boot.
The two options available are Enabled and Disabled. This option is set to
Disabled by default.
By enabling the CPU memory controller to delay running the REFRESH
commands, you can improve the performance for some workloads. By
minimizing the delay time, it is ensured that the memory controller runs
the REFRESH command at regular intervals. For Intel-based servers, this
setting only affects systems configured with DIMMs which use 8 Gb
density DRAMs. This option is set to Minimum by default.
Enables or disables Post Package Repair (PPR) on Uncorrectable Memory
Error. This option is set to Enabled by default.
Enables or disables correctable error logging. This option is set to
Disabled by default.
Description
Each processor core supports up to two logical processors.
If this option is set to Enabled, the BIOS displays all the
logical processors. If this option is set to Disabled, the BIOS
displays only one logical processor per core. This option is set
to Enabled by default.
Enables or disables the virtualization technology for the
processor. This option is set to Enabled by default.