Installing The Front Bezel; System Cover; Removing The System Cover - Dell PowerEdge R7615 Installation And Service Manual

Installing the front bezel

Prerequisites
1. Follow the safety guidelines listed in the
NOTE: The bezel key is part of the bezel package.
Steps
1. Align and insert the tabs on the bezel into the slots on the chassis.
2. Press the bezel until the release button clicks in place.
3. Lock the bezel.
Figure 24. Installing the front bezel

System cover

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Power off the system, including any attached peripherals.
4. Disconnect the system from the electrical outlet and peripherals.
Steps
1. Use a 1/4 inch flat head or a Phillips #2 screwdriver to turn the lock counterclockwise to the unlock position.
2. Open the release latch until the system cover slides back.
3. Lift the cover from the system.
68 Installing and removing system components
Safety instructions.
Safety instructions.
Before working inside your system.