Table of Contents
Advertisement
Figure 45. Removing the Serial COM port
Next steps
Replace the serial COM
port.
Installing the optional serial COM port
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in the
Before working inside your
system.
3. Remove the PCIe blank from the rear of the system.
Steps
1. Align and insert the serial COM port into the slot on the system until firmly seated.
2. Connect the serial port cable to the connector on the system board.
NOTE:
Route the cable properly when you replace it to prevent the cable from being pinched or crimped.
Installing and removing system components
89
Advertisement
Table of Contents
