Mode Changing - ZyXEL Communications XMG1930-30 User Manual

Figure 2 NCC Example Network Topology

1.1.4 Mode Changing

This section describes how to change the Switch's management mode. Refer to the Switch's
standalone mode User's Guide for LED descriptions, including CLOUD LED behavior.
From Standalone to Nebula Cloud Management
To manage your Switch through Nebula, connect the Switch to the Internet, and register it to a site and
organization at the Nebula web portal (https://nebula.zyxel.com).
See the following steps or the Switch Quick Start Guide for registering the Switch.
Go to the NCC to Register the Switch
Go to the Nebula web portal in one of three ways.
1
• Enter https://nebula.zyxel.com in a supported web browser. See the Nebula User's Guide for more
information about supported browsers.
• Click Visit Nebula in the Switch's login page.
• Click the Nebula Control Center icon in the upper right of the Switch's Web Configurator.
Click Get Started in the Nebula web portal. Enter your myZyxel account information. You will be
2
redirected to another screen where you can sign up for a myZyxel account if you do not have one.
Create an organization and a site (using the Nebula setup wizard) or select an existing site.
3
Chapter 1 Getting to Know Your Switch
XMG1930 Series User's Guide
33