Figure 346 SECURITY > ACL > Policy Rule > Add/Edit (With Access L3 License)
The following table describes the labels in this screen.
Table 271 SECURITY > ACL > Policy Rule > Add/Edit
LABEL
DESCRIPTION
Source & Destination
Active
Enable the switch button to enable the policy.
Name
Enter a descriptive name for identification purposes. You can enter up to 32 printable ASCII
characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].
Classifier(s)
This field displays the active classifiers you configure in the SECURITY > ACL > Classifier >
Classifier Setup screen.
Select the classifiers to which this policy rule applies. To select more than one classifier, press
[SHIFT] and select the choices at the same time.
Chapter 68 Policy Rule
XMG1930 Series User's Guide
483