Maintenance - ZyXEL Communications XMG1930-30 User Manual

Figure 467 SECURITY > Storm Control
The following table describes the labels in this screen.
Table 365 SECURITY > Storm Control
LABEL
Active
Port
*
Broadcast (pkt/s)
Multicast (pkt/s)
DLF (pkt/s)
Apply
Cancel

79.41 MAINTENANCE

This section explains how to configure the screens that let you maintain the firmware and configuration
files.
Chapter 79 Networked AV Mode
DESCRIPTION
Enable the switch button to enable traffic storm control on the Switch. Disable the switch
button to disable this feature.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select this option and specify how many broadcast packets the port receives per second.
Select this option and specify how many multicast packets the port receives per second.
Select this option and specify how many destination lookup failure (DLF) packets the port
receives per second.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields.
XMG1930 Series User's Guide
634