Add/Edit An Ipv6 Snooping Vlan; Ipv6 Dhcp Trust Setup - ZyXEL Communications XMG1930-30 User Manual

30-port multi-gigabit smart managed layer-2 switch, 30-port multi-gigabit smart managed layer-2 poe switch
Table of Contents

Advertisement

Table 307 SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snp. VLAN Setup (continued)
LABEL
Policy
Add/Edit
Delete

75.13.1 Add/Edit an IPv6 Snooping VLAN

Use this screen to add/edit a DHCPv6 snooping policy on a specific VLAN interface. Click Add/Edit, or
select an entry and click Add/Edit in the SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snp. VLAN
Setup screen to display this screen.
Figure 389
The following table describes the labels in this screen.
Table 308 SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snp. VLAN Setup > Add/Edit
LABEL
Interface
Policy
Apply
Clear
Cancel

75.14 IPv6 DHCP Trust Setup

Use this screen to specify which ports are trusted for DHCPv6 snooping. To open this screen, click
SECURITY > IPv6 Source Guard > DHCPv6 Trust Setup.
Note: DHCPv6 solicit packets are sent from a DHCPv6 client to a DHCPv6 server. Reply
packets from a DHCPv6 server connected to an untrusted port are discarded.
Use port * to have all ports be Untrusted or Trusted.
Chapter 75 ARP Inspection
DESCRIPTION
This field displays the DHCPv6 snooping policy.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snp. VLAN Setup > Add/Edit
DESCRIPTION
Select the VLAN interface to apply the selected DHCPv6 snooping policy.
Select the IPv6 snooping policy to apply to this VLAN interface.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Clear to clear the fields to the factory defaults.
Click Cancel to not save the configuration you make and return to the last screen.
XMG1930 Series User's Guide
536

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xmg1930 series

Table of Contents