Ipv4 Source Guard; Ipv4 Source Guard Static Binding - ZyXEL Communications XMG1930-30 User Manual

30-port multi-gigabit smart managed layer-2 switch, 30-port multi-gigabit smart managed layer-2 poe switch
Table of Contents

Advertisement

73.2 IPv4 Source Guard

Use this screen to look at the current bindings for DHCP snooping and ARP inspection. Bindings are used
by ARP inspection to distinguish between authorized and unauthorized ARP packets in the network. The
Switch learns the bindings by snooping DHCP packets (dynamic bindings) and from information
provided manually by administrators (static bindings). To open this screen, click SECURITY > IPv4 Source
Guard > IP Source Guard.
Figure 363
The following table describes the labels in this screen.
Table 284 SECURITY > IPv4 Source Guard > IP Source Guard
LABEL
Index
IP Address
VID
MAC Address
Port
Lease
Type

73.3 IPv4 Source Guard Static Binding

Use this screen to manage static bindings for DHCP snooping and ARP inspection. Static bindings are
uniquely identified by the MAC address and VLAN ID. Each MAC address and VLAN ID can only be in
one static binding. If you try to create a static binding with the same MAC address and VLAN ID as an
existing static binding, the new static binding replaces the original one. To open this screen, click
SECURITY > IPv4 Source Guard > IP Source Guard > Static Binding.
Chapter 73 IP Source Guard
SECURITY > IPv4 Source Guard > IP Source Guard
DESCRIPTION
This field displays a sequential number for each binding.
This field displays the IP address assigned to the MAC address in the binding.
This field displays the source VLAN ID in the binding.
This field displays the source MAC address in the binding.
This field displays the port number in the binding. If this field is blank, the binding applies to all
ports.
This field displays how many days, hours, minutes, and seconds the binding is valid; for
example, 2d3h4m5s means the binding is still valid for 2 days, 3 hours, 4 minutes, and 5
seconds. This field displays infinity if the binding is always valid (for example, a static binding).
This field displays how the Switch learned the binding.
static: This binding was learned from information provided manually by an administrator.
dhcp-snooping: This binding was learned by snooping DHCP packets.
XMG1930 Series User's Guide
507

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xmg1930 series

Table of Contents