Service Register - ZyXEL Communications XMG1930-30 User Manual

78.17 Service Register

The Switch requires an Access L3 license to use certain services. You can register your Switch and
manage Switch licenses at www.myzyxel.com.
• To register your Switch, go to www.myzyxel.com > Device Registration. Enter your Switch'es MAC
Address and Serial Number.
• To register your Access L3 license, go to www.myzyxel.com > Service Registration. Enter your Access
L3 License Key.
Note: Make sure you have Internet connectivity when registering your Switch and service
license. Then use the Update button in the Service Register screen to activate the
service
complete description of the Update button). After activating the license, Internet
connectivity is not required to use the license services.
See Table 2 on page 29
Click MAINTENANCE > Service Register to display the screen as shown. Use this screen to activate your
service license and update the service license status.
Figure 423 MAINTENANCE > Service Register
The following table describes the labels in this screen.
Table 327 MAINTENANCE > Service Register
LABEL
Service
Status
Type
Chapter 78 MAINTENANCE
license and update the license status (see
for the services supported when you purchase an Access L3 License.
DESCRIPTION
This displays the name of the service that is available on the Switch.
Licensed indicates the service license is registered to your Switch.
Licensed (activated after reboot) indicates the service license is registered to your Switch but you
need to reboot your Switch to activate the license services.
Not Licensed is displayed when no service license is registered to your Switch.
Trial indicates a 30-day trial service license is currently applied on the Switch.
Standard indicates a service license is currently applied on the Switch.
N/A is displayed if no service license is applied on the Switch.
XMG1930 Series User's Guide
Table 327 on page 577
577
for a