Mode Changing - ZyXEL Communications XS1930-12HP User Manual

Nebula Cloud Management
To have Nebula manage the Switch, you must first register it at the Nebula web portal at https://
nebula.zyxel.com, and ensure that Nebula Control Center Discovery is enabled in Basic Setting > Cloud
Management > Nebula Control Center Discovery in the Switch web configurator (enabled by default).
Note: See the Switch's datasheet for the feature differences between standalone and
Nebula cloud management modes. You can find the Switch's datasheet at the Zyxel
website.
See the NCC (Nebula Control Center) User's Guide for how to configure the Switch using Nebula.

1.1.3 Mode Changing

This section describes how to change the Switch's management mode.
Note: If you change the Switch's management mode from standalone mode to Nebula-
managed mode, the configuration settings of the Switch will be overwritten with what
you have configured in Nebula.
If you change the Switch's management mode from Nebula-managed mode to
standalone mode, the Switch will reset to its factory-default settings.
Chapter 1 Getting to Know Your Switch
XS1930 Series User's Guide
20