Link Aggregation Setting - ZyXEL Communications XMG1930-30 User Manual

34.3 Link Aggregation Setting

Click PORT > Link Aggregation > Link Aggregation Setting to display the screen shown next. See
34.1 on page 224
Figure 148 PORT > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 106 PORT > Link Aggregation > Link Aggregation Setting
LABEL
This is the only screen you need to configure to enable static link aggregation.
Group ID
Active
Chapter 34 Link Aggregation
for more information on link aggregation.
DESCRIPTION
The field identifies the link aggregation group, that is, one logical link containing multiple ports.
Select this to activate a trunk group.
XMG1930 Series User's Guide
227
Section