ZyXEL Communications XMG1930-30 User Manual page 112

Set port 2 to be a permanent member of this VLAN by selecting Fixed in the Control field.
5
Clear the Tx Tagging check box to set the Switch to remove VLAN tags before sending.
6
Click Apply to save the settings to the run-time memory. Settings in the run-time memory are lost when
7
the Switch's power is turned off.
Go to VLAN > VLAN Setup >VLAN Port Setup. Enter "102" in the PVID field for port 2 to add a tag to
8
incoming untagged frames received on that port so that the frames are forwarded to the VLAN group
that the tag defines.
Chapter 6 Tutorials
XMG1930 Series User's Guide
112