68.2 Policy Rules
Click SECURITY > ACL > Policy Rule in the navigation panel to display the screen as shown.
Figure 344 SECURITY > ACL > Policy Rule
The following table describes the labels in this screen.
Table 270 SECURITY > ACL > Policy Rule
LABEL
Index
Active
Name
Classifier(s)
Add/Edit
Delete
68.2.1 Add/Edit a Policy Rule
You must first configure a classifier in the SECURITY > ACL > Classifier > Classifier Setup screen.
Click Add/Edit, or select an entry and click Add/Edit in the SECURITY > ACL > Policy Rule screen to
display this screen.
Chapter 68 Policy Rule
DESCRIPTION
This field displays the policy index number.
This field displays whether policy is activated or not.
This field displays the name you have assigned to this policy.
This field displays the names of the classifier to which this policy applies.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
XMG1930 Series User's Guide
481