Ipv6 Router Discovery Setup; Edit Ipv6 Router Discovery - ZyXEL Communications XMG1930-30 User Manual

24.8 IPv6 Router Discovery Setup

Use this screen to configure router discovery settings for each interface. Click SYSTEM > IPv6 > IPv6
Neighbor Discovery > IPv6 Router Discovery Setup to display the screen as shown next.
Figure 117 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Router Discovery Setup
The following table describes the labels in this screen.
Table 72 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Router Discovery Setup
LABEL
Index
Interface
Flags
Minimum Interval
Maximum Interval
Lifetime
Suppress
Edit

24.8.1 Edit IPv6 Router Discovery

Use this screen to configure router discovery settings for each interface. Select an entry and click Edit in
the SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Router Discovery Setup screen to display the screen
as shown next.
Chapter 24 IPv6
DESCRIPTION
This is the interface index number.
This is the name of the IPv6 interface you created.
This field displays whether IPv6 hosts use DHCPv6 to obtain IPv6 stateful addresses (M) and/
or additional configuration settings (O).
This field displays the minimum time interval at which the Switch sends router
advertisements for this interface.
This field displays the maximum time interval at which the Switch sends router
advertisements for this interface.
This field displays how long the router in router advertisements can be used as a default
router for this interface.
This field displays whether the Switch sends router advertisements and responses to router
solicitations on this interface (ON) or not (OFF).
Select an entry's check box to select a specific entry.
Click Edit to edit the selected entry.
XMG1930 Series User's Guide
182