Ip Setup - ZyXEL Communications XMG1930-30 User Manual

Table 57 SYSTEM > IP Setup > IP Status > IP Status Details: DHCP (continued)
LABEL
Lease Time
Renew Time
Rebind Time
Lease Time Start
Lease Time End
Default
Gateway
DNS Server

23.3 IP Setup

Use this screen to configure the default gateway device, the default domain name server and add IP
domains. Click SYSTEM > IP Setup > IP Setup in the navigation panel to display the screen as shown.
Note: The Switch allows you to set a static IP interface in the same subnet that already has a
DHCP-assigned IP interface on the Switch. The Switch will use the static IP you set and
the DHCP-assigned IP will be set to 0.0.0.0.
Figure 101 SYSTEM > IP Setup > IP Setup
The following table describes the labels in this screen.
Table 58 SYSTEM > IP Setup > IP Setup
LABEL
IP Setup
Default
Gateway
Domain Name
Server 1/2
Chapter 23 IP Setup
DESCRIPTION
This displays the length of time in seconds that this interface can use the current dynamic IP
address from the DHCP server.
This displays the length of time from the lease start that the Switch will request to renew its
current dynamic IP address from the DHCP server.
This displays the length of time from the lease start that the Switch will request to get any
dynamic IP address from the DHCP server.
This displays the date and time that the current dynamic IP address assignment from the DHCP
server began. You should configure date and time in SYSTEM > General Setup.
This displays the date and time that the current dynamic IP address assignment from the DHCP
server will end. You should configure date and time in SYSTEM > General Setup.
This displays the IP address of the default gateway assigned by the DHCP server. 0.0.0.0 means
no gateway is assigned.
This displays the IP address of the primary and secondary DNS servers assigned by the DHCP
server. 0.0.0.0 means no DNS server is assigned.
DESCRIPTION
Type the IP address of the default outgoing gateway in dotted decimal notation, for example
192.168.1.254.
Enter a domain name server IPv4 address in order to be able to use a domain name instead of
an IP address.
XMG1930 Series User's Guide
168