ZyXEL Communications XMG1930-30 User Manual page 274

Figure 179 Advanced Application > Port Buffer
The following table describes the labels in this screen.
Table 131 Advanced Application > Port Buffer
LABEL DESCRIPTION
Port This is the port index number.
Active Select this to allow this Switch to improve the speed of Multi-Gigabit ports directly connected
to 1 Gbps clients when the download speed from the client falls below 800 Mbps.
After enabling, test if the download speed has improved. If not, disable port buffer on the
port.
Note: Port buffer cannot be enabled on fiber ports.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click this to reset the value in this screen to their last-saved value.
Chapter 38 Port Setup
XMG1930 Series User's Guide
274