ZyXEL Communications XMG1930-30 User Manual page 241

30-port multi-gigabit smart managed layer-2 switch, 30-port multi-gigabit smart managed layer-2 poe switch
Table of Contents

Advertisement

Chapter 35 Link Layer Discovery Protocol (LLDP)
Table 111 PORT > LLDP > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic TLV)
LABEL
DESCRIPTION
Port ID TLV
Port ID Subtype – This displays how the port of the remote device is identified.
Port ID – This displays the port ID of the remote device. The port ID is identified by the port
ID subtype.
Time To Live TLV
Time To Live – This displays the time-to-live (TTL) multiplier of LLDP frames. The device
information on the neighboring devices ages out and is discarded when its corresponding
TTL expires. The TTL value is to multiply the TTL multiplier by the LLDP frames transmitting
interval.
Port Description
Port Description – This displays the remote port description.
TLV
System Name
System Name – This displays the system name of the remote device.
TLV
System
System Description – This displays the system description of the remote device.
Description TLV
System
This displays whether the system capabilities are enabled and supported on the remote
Capabilities TLV
device.
System Capabilities Supported
System Capabilities Enabled
Management
This displays the management address (IPv4 and IPv6) of the remote device.
Address TLV
Management Address Subtype
Management Address
Interface Number Subtype
Interface Number
Object Identifier
XMG1930 Series User's Guide
241

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xmg1930 series

Table of Contents