Mode Changing - ZyXEL Communications XGS2220 Series User Manual

manage and monitor the Switch. You may also access a minimized version of the Web Configurator in
cloud mode.
Nebula Cloud Management
To have Nebula manage the Switch, you must first register it at the Nebula web portal at https://
nebula.zyxel.com, and ensure that Nebula Control Center (NCC) Discovery is enabled in SYSTEM >
Cloud Management in the Switch Web Configurator.
Note: See the Switch's datasheet for the feature differences between standalone and
Nebula cloud management modes. You can find the Switch's datasheet at the Zyxel
website.
See the NCC (Nebula Control Center) User's Guide for how to configure the Switch using Nebula.
Figure 2 NCC Example Network Topology

1.1.3 Mode Changing

This section describes how to change the Switch's management mode. Refer to the Switch's
standalone mode User's Guide for LED descriptions, including CLOUD LED behavior.
From Standalone to Nebula Cloud Management
To manage your Switch through Nebula, connect the Switch to the Internet, and register it to a site and
organization at the Nebula web portal (https://nebula.zyxel.com).
See the following steps or the Switch Quick Start Guide for registering the Switch.
Chapter 1 Getting to Know Your Switch
XGS2220 Series User's Guide
31