Mode Changing - ZyXEL Communications GS1915 Series User Manual

1.1.2 Mode Changing

This section describes how to change the Switch's management mode.
Note: If you change the
managed mode, the configuration settings of the
you have configured in Nebula.
Note: If you change the
standalone mode, the
From Standalone to Nebula Cloud Management
To manage your Switch through Nebula, connect the Switch to the Internet, and register it to a site and
organization at the Nebula web portal (https://nebula.zyxel.com).
See the following steps or the Switch Quick Start Guide for how to do device registration.
Go to the NCC to Register the Switch
Go to the Nebula web portal in one of three ways.
1
• Enter https://nebula.zyxel.com in a supported web browser. See the Nebula User's Guide for more
information about supported browsers.
• Click Visit Nebula in the Switch's login page.
• Click the Nebula icon in the upper right of the Switch's Web Configurator.
Click Get Started in the Nebula web portal. Enter your myZyxel account information. You will be
2
redirected to another screen where you can sign up for a myZyxel account if you do not have one.
Create an organization and a site (using the Nebula setup wizard) or select an existing organization.
3
Register the Switch by entering its Registration MAC Address and serial number and assign it to the site.
4
The serial number and MAC address can be found in the Status screen or the device back label on the
Switch.
Use the Zyxel Nebula Mobile App to Register the Switch
Download and open the Zyxel Nebula Mobile app in your mobile device. Click Start on the first page.
1
Click Create account to create a myZyxel account or enter your existing account information to log in.
Create an organization and site, or select an existing organization using the Zyxel Nebula Mobile app.
2
Select a site and scan the Switch's QR code or manually enter the information to add it to the site. You
3
can find the QR code:
• On a label on the Switch or
• On its box or
• In the Web Configurator at Basic Setting > Cloud Management.
See Section 3.3 on page 37
more information about the Hybrid Mode field in the Status screen to see if the Switch goes into Nebula
cloud management mode successfully.
Chapter 1 Getting to Know Your Switch
's management mode from standalone mode to Nebula-
Switch
's management mode from Nebula-managed mode to
Switch
will reset to its factory-default settings.
Switch
for more information about the CLOUD LED or
GS1915 Series User's Guide
20
will be overwritten with what
Switch
Section 7.2 on page 78 for