Advanced Settings - ZyXEL Communications XMG1930-30 User Manual

Table 16 Wizard > Basic Settings > Step 4 Summary (continued)
LABEL
Networked AV
VLAN IP
IGMP Snooping
IGMP Snooping
Querier
Unknown
Multicast Frame
Transmitter/
Receiver
Connected Port
Inter-switch
Connected Port
Previous
Finish
Cancel

4.4.2 Advanced Settings

In Advanced Settings, you can set up IP or DNS, set up your password, SNMP community, configure
Networked AV service to a VLAN, select and assign port role, link aggregation (trunking), and view
finished results.
In order to set up your IP or DNS, please do the following. Click Wizard > Advanced Settings > Step 1 IP to
access this screen.
Chapter 4 Web Configurator
DESCRIPTION
This field displays the Switch's IP address for it to be managed over the AVoIP network.
This field displays Active when IGMP Snooping is enabled to forward group multicast traffic
only to ports that are members of that group.
Otherwise, it displays Inactive.
This field displays Active when the Switch is allowed to send IGMP General Query messages
to the VLANs with the multicast hosts attached.
Otherwise, it displays Inactive.
This field displays the action to perform when the Switch receives an unknown multicast
frame. It displays Drop when the frames are discarded. It displays Flooding when the frames
are sent to all ports.
This field shows the Switch's port numbers for connection to networked audio and video
equipment.
This field shows the Switch's port numbers for connection to another switch.
Click Previous to show the previous screen.
Review the information and click Finish to create the task.
Click Cancel to exit this screen without saving.
XMG1930 Series User's Guide
72