Connecting
3.6 Connecting I/Os
Shield connection for TB30
The following figure shows the cable routing, cable connection and the connection of the
I/Os on the TB30. The TB30 is inserted in a CU320-2 here.
Figure 3-10
The arrangement is similar when inserted in a D4x5-2, see also Section Creating a shield
connection (Page 59) for more details.
The permissible bending radii for the cables must be maintained when the cables are being
laid.
62
Shield connection for TB30 using the analog I/Os as an example
Commissioning and Hardware Installation Manual, 02/2012
SIMOTION D4x5-2