Siemens SIMOTION D4 5-2 Series Commissioning And Hardware Installation Manual page 36

Installing
2.3 Installing supplementary system components
Mounting the CX32-2 on another CX32-2
A description with photos of opening the cover can be found in Section Removing the cover
of the CX32-2 (Page 40).
Table 2- 1 Mounting a CX32-2 on another CX32-2
Opening the covers.
Mounted bracket.
36
Unscrewing the screw
(M3, Torx T10)
Closing the cover.
The bracket must be moved so that the pin is
in the opening of the bracket. Tighten the
screw (tightening torque 0.8 Nm).
Commissioning and Hardware Installation Manual, 02/2012
SIMOTION D4x5-2