Siemens SIMOTION D4 5-2 Series Commissioning And Hardware Installation Manual page 294

Commissioning (software)
6.20 Configuring Safety Integrated functions
Required hardware
Where safety functions are controlled via the TM54F or via PROFIBUS/PROFINET with
PROFIsafe, at the very least the following hardware versions must be used:
Table 6- 16
Module
SIMOTION D425-2 DP
SIMOTION D425-2 DP/PN
SIMOTION D435-2 DP
SIMOTION D435-2 DP/PN
SIMOTION D445-2 DP/PN
SIMOTION D455-2 DP/PN
SIMOTION CX32-2
CBE30-2
The information was not available at the time the documentation was published. Current
1)
information can be found at
(http://support.automation.siemens.com/WW/view/en/27585482).
The hardware requirements of the drive components can be found in the
Safety Integrated
294
Required hardware versions
Order number
6AU1425-2AA00-0AA0
6AU1425-2AD00-0AA0
6AU1435-2AA00-0AA0
6AU1435-2AD00-0AA0
6AU1445-2AD00-0AA0
6AU1455-2AD00-0AA0
6AU1432-2AA00-0AA0
6FC5312-0FA00-2AA0
Function Manual.
Required product version
1)
1)
1)
1)
C
C
B
1)
Commissioning and Hardware Installation Manual, 02/2012
SINAMICS S120
SIMOTION D4x5-2