Mounting Methods / Cbl Slots; Mounting Positions Of The Cbl In Mc Compact Plus Units - Siemens SIMOVERT FC Series Operating Instructions Manual

03.99
2.1

Mounting methods / CBL slots

NOTE
2.1.1

Mounting positions of the CBL in MC Compact Plus units

NOTE
Position of the slots
WARNING
Siemens AG 6SE7087-6NX84-0GB0
SIMOVERT MASTERDRIVES
The CBL can be directly mounted into Compact PLUS units. For all
other frame sizes, it is mounted on the CUMC or CUVC or connected in
the electronics box with an adapter board.
In principle, the optional CBL board (Communications Board CC-Link)
can be mounted in any slot. Please bear in mind, however, that an
encoder board always requires Slot C.
SIE MENS
A
S1
X101 B
X103 C
Fig. 2-2 Position of the slots (right-hand-side side wall removed)
Because of the DC link capacitors, there continues to be dangerous
voltage in the unit until up to 5 minutes after disconnection. Therefore
the unit must not opened until at least this time has expired.
Operating Instructions
Fixing screw
for side wall
Title fields for
optional boards
Fixing screw
for side wall
Description
Slot A
Slot B
Slot C
2-3