Chapter 2: Accelerator Card Overview; Card Features - Xilinx Alveo U200 Getting Started

Accelerator Card Overview

Card Features

Features of the production Alveo™ U200/U250/U280 data center accelerator cards are listed in
the following table.
Table 1: Alveo U200/U250/U280 Features
Card Component
FPGA
DDR4
HBM
PCIe
Network Interface
I2C Bus
Status LEDs
Power Management
Electrical Design Power
Configuration Options
UART
Notes:
1. Vitis™ unified software platform based applications are only designed to run with electrical design power at 215W.
UG1301 (v2.2) August 19, 2022
Getting Started with Alveo Accelerator Cards
U200
UltraScale+™
XCU200-2FSGD2104E
64 gigabyte (GB)
4x DDR4 16 GB
2400 mega-transfers per second (MT/s), on 64-bit ECC DIMM
–
16-lane PCI™ Express
PCIe Integrated Endpoint block connectivity
Gen1, 2, or 3 up to x16
2x QSFP28
✓
✓
Power management with system management bus (SMBus) voltage, current, and
temperature monitoring
65W with PCIe slot power only
140W with 110A max V current PCIe slot power and 6-pin PCIe AUX power cable
CCINT
connected
215W with 160A max V current PCIe slot power and 8-pin PCIe AUX power cable
CCINT
1
connected
1 gigabit (Gb) Quad Serial Peripheral Interface (SPI) flash memory
Micro-USB JTAG configuration port
UART access through the USB port

Chapter 2: Accelerator Card Overview

U250
UltraScale+
XCU250-2LFIGD2104E
–
2x QSFP28
✓
✓
Send Feedback
Chapter 2
U280
UltraScale+
XCU280-L2FSVH2892E
32 gigabyte (GB)
2x DDR4 16 GB
8 GB, 32-pseudo channels
Gen1, 2, or 3 up to x16
Gen4 x8
2x QSFP28
✓
✓
www.xilinx.com
5