Ricoh Aficio MP C3001 Service Manual page 1885

System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
No Function
RTI/CSI/CPS code display
0 0: Enable
1: Disable
1-7 Not used
No Function
Communication after the
Journal data storage area has
0 become full
0: Impossible
1: Possible
Action when the SAF memory
1 has become full during
scanning
SM
System Switch 1D (SP No. 1-101-030)
0: RTI, CSI, CPS codes are displayed on the
top line of the LCD panel during
communication.
1: Codes are switched off (no display)
Do not change these settings.
System Switch 1E (SP No. 1-101-031)
0: When this switch is on and the journal
history becomes full, the next report prints. If
the journal history is not deleted, the next
transmission cannot be received. This prevents
overwriting communication records before the
machine can print them.
1: If the buffer memory of the communication
records for the Journal is full, fax
communications are still possible. But the
machine will overwrite the oldest
communication records.
0: If the SAF memory becomes full during
scanning at the memory transmission, the
successfully scanned pages are transmitted.
81
Comments
Comments
This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the report
(e.g., no paper).
Bit Switches
D545