Ricoh Aficio MP C3001 Service Manual page 1877

Conditions for printing the
protocol dump list
6 0: Print for all communications
1: Print only when there is a
communication error
Priority given to various types of
remote terminal ID when
printing reports
7 0: RTI > CSI > Dial label > Tel.
number
1: Dial label > Tel. number > RTI
> CSI
No Function
Automatic port selection
0
0: Disabled, 1: Enabled
1-2 Not used
Continuous polling reception
3
0: Disabled 1: Enabled
Dialing on the ten-key pad when
the external telephone is
4
off-hook
0: Disabled 1: Enabled
SM
This switch becomes effective only when
system switch 00 bit 6 is set to 1.
1: Set this bit to 1 when you wish to print a
protocol dump list only for communications with
errors.
NOTE: The memory size is limited. Use this bit
switch only when some log reports are
necessary.
This bit determines which set of priorities the
machine uses when listing remote terminal
names on reports.
Dial Label: The name stored, by the user, for
the Quick/Speed Dial number.
System Switch 0A (SP No. 1-101-011)
When "1" is selected, a suitable port is
automatically selected if the selected port is not
used.
NOTE: This bit is useful if all communication
lines at a customer site are not same quality.
Do not change these settings.
This feature allows a series of stations to be
polled in a continuous cycle. This will continue
until the polling reception file is erased.
The dialing interval is the same as memory
transmission.
0: Prevents dialing from the ten-key pad while
the external telephone is off-hook. Use this
setting when the external telephone is not by
the machine, or if a wireless telephone is
73
Bit Switches
Comments
D545