Ricoh Aficio MP C3001 Service Manual page 1874

Bit Switches
System Switch 01 - Not used (Do not change the factory settings.)
No Function
0 Not used
Forced reset after transmission
stalls
2
0: Off
1: On
3 Not used
File retention time
0: Depends on User Parameter
4
24 [18(H)]
1: No limit
5 Not used
Memory read/write by RDS
Bit 7 Bit 6
0 0
0 1
6-7
1 0
1 1
D545
System Switch 02 (SP No. 1-101-003)
Do not change these settings.
With this setting on, the machine resets itself
automatically if a transmission stalls and fails to
complete the job.
Do not change these settings.
1: A file that had a communication error will not
be erased unless the communication is
successful.
Do not change this setting.
(0,0): All RDS systems are always locked out.
(0,1), (1,0): Normally, RDS systems are locked
Setting
out, but the user can temporarily switch RDS
on to allow RDS operations to take place. RDS
Always disabled
will automatically be locked out again after a
User selectable
certain time, which is stored in System Switch
03. Note that if an RDS operation takes place,
User selectable
RDS will not switch off until this time limit has
Always enabled
expired.
(1,1): At any time, an RDS system can access
the machine.
70
Comments
SM