Ricoh Aficio MP C3001 Service Manual page 1909

Communication Switch 0B (SP No. 1-104-012)
No Function
Use of Economy Transmission
during a Transfer operation to
0
end receivers
0: Disabled, 1: Enabled
Use of Economy Transmission
during a Transfer operation to
1
the Next Transfer Stations
0: Disabled, 1: Enabled
Use of Label Insertion for the
End Receivers in a Transfer
2
operation
0: Disabled, 1: Enabled
Conditions required for Transfer
Result Report transmission
3 0: Always transmitted
1: Only transmitted if there was
an error
Printout of the message when
4 acting as a Transfer Station
0: Disabled, 1: Enabled
Action when there is no fax
number in the programmed
Quick/Speed dials which meets
5
the requesting terminal's own
fax number
0: Transfer is disabled
SM
Comments
These bits determine whether the machine
uses the Economy Transmission feature when
it is carrying out a Transfer operation as a
Transfer Station.
This bit determines whether the machine uses
the Label Insertion feature when it is carrying
out a Transfer operation as a Transfer Station.
0: When acting as a Transfer Station, the
machine will always send a Transfer Result
Report back to the Requesting Station after
completing the Transfer Request, even if there
were no problems.
1: The machine will only send back a Transfer
Result Report if there were errors during
communication, meaning one or more of the
End Receivers could not be contacted.
When the machine is acting as a Transfer
Station, this bit determines whether the
machine prints the fax message coming in
from the Requesting Terminal.
After the machine receives a transfer request,
the machine compares the last N digits of the
requesting terminal's own fax number with all
the Quick/Speed dials programmed in the
machine. (N is the number programmed in
communication switch 0C.)
105
Bit Switches
D545