Ricoh Aficio MP C3001 Service Manual page 1903

No Function
Paper size selection priority
0 0: Width
1: Length
Paper size selected for printing A4
width fax data
1
0: 8.5" x 11" size
1: A4 size
Page separation
2 0: Enabled
1: Disabled
Printing the sample image on reports
Bit 4 Bit 3
0 0
3-4
0 1
1 0
1 1
5-6 Not used
Equalizing the reduction ratio among
separated pages
7
(Page Separation)
0: Enabled
SM
Printer Switch 0E (SP No. 1-103-015)
0: A paper size that has the same width
as the received data is selected first.
1: A paper size which has enough length
to print all the received lines without
reduction is selected first.
This switch determines which paper size
is selected for printing A4 width fax data,
when the machine has both A4 and 8.5" x
11" size paper.
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically
prints the fax message.
"Same size" means the sample image is
Setting
printed at 100%, even if page separation
The upper half only
occurs.
User Parameter Switch 19 (13H) bit 4
50% reduction
must be set to "0" to enable this switch.
(sub-scan only)
Refer to Detailed Section Descriptions for
Same size
more on this feature.
Not used
Do not change the settings.
0: When page separation has taken
place, all the pages are reduced with the
same reduction ratio.
1: Only the last page is reduced to fit the
99
Bit Switches
Comments
D545