Bit Switches
On hook dial
5
0: Disabled 1: Enabled
6-7
Not used
System Switch 0B - Not used (Do not change the factory settings.)
System Switch 0C - Not used (Do not change the factory settings.)
System Switch 0D - Not used (Do not change the factory settings.)
No
Function
0-1
Not used
Enable/disable for direct
sending selection
2
0: Direct sending off
1: Direct sending on
D545
connected as an external telephone.
1: The user can dial on the machine's ten-key
pad when the handset is off-hook.
0: On hook dial is disabled.
Do not change the factory settings
System Switch 0E (SP No. 1-101-015)
Do not change the settings.
Direct sending cannot operate when the
capture function is on during sending. Setting
this switch to "1" enables direct sending without
capture.
Setting this switch to "0" masks the direct
sending function on the operation panel so
direct sending with ScanRouter cannot be
selected.
74
Comments
SM