Mounting An Xre200 External Routing Engine On Four Posts In A Rack Or Cabinet - Juniper XRE200 Hardware Manual

6. Repeat this procedure for the mounting brackets on the opposite side of the external Routing Engine.
Tighten all screws.
7. Ensure that the external Routing Engine chassis is level by verifying that all screws on one side of the
rack are aligned with the screws on the other side. See
Figure 20: XRE200 External Routing Engine Mounted on Two Posts
Attach the front bracket to the chassis, and secure
the chassis to the post. Attach the rear bracket to the
other side of the post, and secure the chassis to
the rear bracket, adjusting the bracket width as needed.
SEE ALSO
Connecting AC Power to an XRE200 External Routing Engine | 79
Mounting an XRE200 External Routing Engine on Four Posts in a Rack or
Cabinet
You can mount an XRE200 External Routing Engine on four posts of a 19-in. rack or cabinet by using the
four-post rack-mount kit. (The remainder of this topic uses "rack" to mean "rack or cabinet.")
You can mount the external Routing Engine on two posts in either a two-post rack or a four-post rack by
using the mounting brackets provided with the external Routing Engine. See
Routing Engine on Two Posts in a Rack or Cabinet" on page
Before mounting the external Routing Engine on four posts in a rack:
Figure 20 on page 73.
"Mounting an XRE200 External
71.
73