Manually Remove A Ptx10004 From A Four-Post Rack - Juniper PTX10004 Hardware Manual

4. Move the lift away from the rack and lower the platform on the lift (see
5. Use the lift to transport the router to its new location.
SEE ALSO
Power Off a PTX10004 | 226

Manually Remove a PTX10004 from a Four-Post Rack

If you cannot use a mechanical lift to remove the router (the preferred method), you can install it manually.
CAUTION:
controllers installed. Lifting the chassis and mounting it in a rack or cabinet requires
at least three people.
Make sure the chassis is empty (contains only the fan tray controllers) before you lift
it.
The chassis weighs approximately 110 lb (50 kg) with only the fan tray
Figure 117 on page 235).
235