Routing And Control Board - Juniper PTX10004 Hardware Manual

Table 3: Switch Fabric Configuration Overview (continued)
Configuration
PTX10004–PREM2
PTX10004-PREM3
Figure 4: JNP10004-SF 3 SIB

Routing and Control Board

The Routing and Control Board (RCB) contains a Routing Engine and is responsible for system management
and system control in the PTX10004. See
Descriptions" on page 62. RCBs are field-replaceable units (FRUs) that are installed in the front of the
chassis in the slots labeled CB0 and CB1.
The supported models of RCB for JNP10008-SF3 fabric systems are:
JNP10K-RE1-E, 64 gigabytes of memory
JNP10K-RE1-E128, 128 gigabytes of memory
These RCBs runs Junos OS Evolved. See
Number of SIBs
4
6
"PTX10004 Routing and Control Board Components and
Figure 5 on page 24.
Forwarding Capacity
38.4 Tbps
57.6 Tbps
23