Nortel Meridian SL-100 SE Replacement page 68

68 FSP card replacement procedures
NT0X91AE
in Meridian Cabinet Remote Module-S
3
FSP card
NT0X91AE
NT0X91AE
4
At the MAP terminal:
5
6
7
8
555-4031-547 Standard 12.02 July 2002
Record information on FSP circuit breakers and network shelf
positions associated with the card you are replacing. Use the
following table to get this information.
FSP card
position
CD2
CD4
Select the shelf associated with the FSP card you are replacing.
Access the PM level of the MAP display by typing
>MAPCI;MTC;PM
and press the Enter key.
Post the PM by typing
>POST pm_type pm_no
and press the Enter key.
where
pm_type
is the type of PM (RCC2)
pm_no
is the number of the PM (number of RCC in table RCCINV)
Determine the state of the PM (active or inactive).
Manually busy the PM by typing
>BSY UNIT unit_no
and press the Enter key.
(continued)
FSP circuit
breakers Shelf position
CB3, CB7, extension shelf, position
CB8 21, slots 1 to 12 - unit
0RCC2 shelf, position 35,
slot 1RMM shelf, position
49, slot 18
CB3, CB7, extension shelf, position
CB8 21, slots 13 to 26 -
unit1RCC2 shelf, position
35, slot 26