Nortel Meridian SL-100 SE Replacement page 280

13
14
15
At the MAP terminal
16
17
18
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
MCRM-S card replacement procedures 280
Using your fingers or thumbs, push on the upper and lower
edges of the faceplate to ensure that the card is fully seated in
the shelf.
Close the locking levers.
Use the following information to determine where to proceed.
If you entered this proce-
dure from
alarm clearing procedures
other
Load the inactive RCC2 unit by typing the following string:
>LOADPM
and pressing the Enter key.
Use the following information to determine where to proceed.
If load
passed
failed
Test the inactive unit by typing the following string:
> TST
and pressing the Enter key.
in an MCRM-S RCC2
Do
Step 25
Step 16
Do
Step 18
Step 26
NTMX74
(continued)