Nortel Meridian SL-100 SE Replacement page 126

10
11
12
13
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
MCRM-S card replacement procedures 126
Open the locking levers on the replacement card. Align the card
with the slots in the shelf and gently slide the card into the shelf.
Using your fingers or thumbs, push on the upper and lower
edges of the faceplate to ensure that the card is fully seated in
the shelf.
Close the locking levers.
Use the following information to determine where to proceed.
If you entered this proce-
dure from
alarm clearing procedures
other
in an MCRM-S RMM
Do
Step 20
Step14
NT0X10
(continued)