Table of Contents
Advertisement
143 MCRM-S card replacement procedures
NT2X09
in an MCRM-S RMM
> sil
7
8
555-4031-547 Standard 12.02 July 2002
(continued)
sound, silence it by typing the following string at the MAP
terminal:
and pressing the Enter key.
Locate the card to be removed on the appropriate shelf as
shown in the following figures.
CAUTION
Equipment damage
When inserting or removing a card, do not
apply direct pressure to the components or
force the cards into the slots.
Open the locking levers on the card to be replaced and gently
pull the card towards you until it clears the shelf.
Advertisement
Table of Contents
