Table of Contents
Advertisement
213 MCRM-S card replacement procedures
NT6X87
in an MCRM-S LCME
At the RMM shelf
5
6
555-4031-547 Standard 12.02 July 2002
(continued)
CAUTION
Static discharge may cause damage to circuit packs
Put on a wrist strap and connect it to the frame
of the RMM before removing any cards. This
protects the RMM against service degradation
caused by static electricity.
CAUTION
Card damage - transport
Take these precautions to protect the circuit
cards from electrical and mechanical damage
while transporting cards. When handling a
circuit card not in and Electrostatic Discharge
(ESD) protective container, stand on a
conductive floor mat and wear a wrist strap
connected, through a 1-megohm resistor, to a
suitably grounded object, such as a metal
workbench or a DMS frame (Northern
Telecom Corporate Standard 5028).Store and
transport circuit cards in an ESD protective
container.
CAUTION
Special tools required
Take these precautions when removing or
inserting a card:Card shrouds and removal
tools are required for removing cards from the
line drawers.
Put on a wrist strap.
Face the drawer shelf and grasp the handle at the bottom of the
drawer with the right hand.
Advertisement
Table of Contents
