Application - Nortel Meridian SL-100 SE Replacement

NTBX01
in an MCRM-S RCC2

Application

Use this procedure to replace the cards in the shelves or frames
identified in the following table.
Procedure to replace NTBX01 cards in a MCRM-S RCC2
PEC Suffixes
NTBX01 AB
See the following figure for NTBX01 card positions in the Meridian
Cabinet Remote Module-Second series (MCRM-S) RMM.
0
4
Note: Positions 04 and 24 are always provisioned.
Action
The following flowchart is only a summary of the procedure. To replace
the card, use the instructions in the step-action procedure that follows
the flowchart.
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
MCRM-S card replacement procedures 229
Card name
ISDN Pre-processor MCRM-S RCC2
2
4
Shelf/frame name