Nortel Meridian SL-100 SE Replacement page 195

195 MCRM-S card replacement procedures
NT6X74
in an MCRM-S RMM
14
15
16
17
18
555-4031-547 Standard 12.02 July 2002
(continued)
Use the following information to determine where to proceed.
If
message "loadfile not found in
directory" is received
load passes
load fails
Use the following information to determine where to proceed.
If you are using
System Load Module Version 1
System Load Module Version 2
List the loadfile in the directory by entering the following string:
>DSKUT;LISTVOL D000volume_name all
or
>DSKUT;LISTVOL D010volume_name all
and pressing the Enter key.
where
volume_name
is the name of the disk volume
Local operating company policy determines on which disk, D000
or D010, the loadfile is to be placed.Proceed to Step 18.
List the loadfile in the directory by entering the following string:
>DISKUT;LV S00D >LF
or
> diskut;LV s01d>Lf
and pressing the Enter key.Go to Step 18.
Leave the disk utility by entering the following string:
>QUIT
and pressing the Enter key.
Do
Step 15
Step 18
Step 26
Do
Step 16
Step 17