Application - Nortel Meridian SL-100 SE Replacement

Application

Use this procedure to replace the NT8D22 card in an intelligent
peripheral equipment (IPE).
Procedure to replace NT8D22 cards in an IPE
PEC
NT8D22
The following figure shows the location of the XSM at the rear of the
pedestal.
The following flowchart is a summary of this procedure. Use the
instructions in the step-action table that follows the flowchart to perform
the procedure.
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
Suffixes Name
AC extended system monitor
(XSM)
extended system monitor (XSM)
J3 J5 J6
DISCONNECT FROM SOURCE
0 1 2 3
MDL
BLO
(rear view with grill removed)
IPE card replacement procedures 75
J4
CAUTION
OF DC POWER BEFORE
REMOVING THIS UNIT
FROM THE PEDESTAL
Pedestal Base
NT8D22
in an IPE module