Nortel Meridian SL-100 SE Replacement page 268

At the RCC2 shelf
9
10
11
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
MCRM-S card replacement procedures 268
CAUTION
Static electricity damage
Before removing any cards, put on a wrist
strap and connect it to the wrist strap
grounding point on the left side of the frame
supervisory panel of the RCC2. This protects
the equipment against damage caused by
static electricity.
Put on a wrist strap.
Locate the card to be removed on the appropriate shelf as
shown in the following figures.
CAUTION
Equipment damage
When inserting or removing a card, do not
apply direct pressure to the components or
force the cards into the slots.
Open the locking levers on the card to be replaced and gently
pull the card towards you until it clears the shelf.
in an MCRM-S RCC2
NTMX73
(continued)